The design and execution of your floating restaurant corresponds to the current D standards and DIB guidelines, as well as the German shipping law according to the version dated 13.02.2013
When planning and defining the construction and superstructures, as well as materials and built-in parts, great importance was attached to ecological aspects using renewable raw materials and low emissions. The building physics values achieved thereby largely correspond to the standards of a low-energy house and thus enable year-round living on the water with the best indoor climate conditions.
Construction Modular construction in CLT solid wood panels from KLH
Ponton Special wooden construction with coating
CLT facade with insulation and wooden cladding
Roof CLT flat roof with foil covering

Restaurant area on 2 levels, terrace on the ground floor and 1st floor
Total area about 720.00 m²
Total outdoor area approx. 105.00 m² roof area total 220.00 m²
Ponton: length 24.00 m width 15.00 m


  • Ground floor
  • Anteroom open space and landing stage
  • Lift
  • Kitchen
  • Bar counter
  • Dining room
  • Lounge for workers
  • Equipment room
  • Open space

First floor

  • Open space
  • Toilet
  • Stairway
  • Lift
  • Bar counter
  • Dining room
  • Shower workers
  • Changing room workers
  • Open space

Floating restaurant
Construction and equipment description
EuroMbao Ltd.


1.1 pontoon / float
In recent years, wood as a basic raw material for the construction of floating systems has been replaced by other materials such as steel, aluminum, concrete and various plastics. Due to the rise in oil and energy prices and the scarcity of raw materials, renewable raw materials and new technical developments are increasingly being used. Sustainable use of the environment and the available resources is an important aspect in order to use alternative options.

The development of an innovative pontoon system made of cross-plywood and coated with environmentally friendly materials is the solution. Ecological and economic aspects are the greatest advantage over other pontoon systems on the market. The prefabrication of the individual pontoon plates and the coating in the factory guarantee precise processing and a high level of quality. Transport is much cheaper than with fully assembled conventional pontoon systems. On-site assembly can also be carried out at a very low cost. Another advantage of this pontoon system is its almost fully usable interior, since this wooden pontoon system does not require any stiffening elements or separate chambers. With more storage and living space in the pontoon, more living space is added to the actual house.

The wooden pontoon consists of cross plywood. In order to ensure a stable construction, the statics of the floats are carried out in accordance with the regulations of Germanischer Lloyd.

The coating system for the wooden pontoon meets the highest standards in terms of durability, tightness, freedom from maintenance, cost optimization and ecological criteria. The PU film coating is mainly used to seal water basins, sewage treatment plants, bridges and underground garages. After priming the material, a long-lasting film seal is sprayed on. The film is then sealed with a UV-protected paint. The tightness and behavior of film and wood in water are excellent. The material is approved by the EU and environmentally friendly.

More see our PDF file.